Emerald Hard Surface Cleaner & Degreaser, 4L, 50206 - Unscented

Hard Surface Cleaning

1. Dilute: Mix with unheated tap water according to the dilution rates on the label.
2. Apply: Use a sprayer, sponge, mop, or cloth to clean the surface.

Floor Deep Scrubbing

1. Prepare the Area: Remove obstacles and place wet floor signs at all entrances.
2. Initial Cleaning: Dust mop the floor and remove stuck-on debris (e.g., gum or tape).
3. Dilute the Product: Mix Emerald Degreaser at a 1:40 dilution with unheated tap water.
4. Apply Solution: Evenly distribute the diluted cleaner and allow it to dwell for 3–5 minutes.
5. Scrub the Surface: Use a floor machine (175 RPM) or auto scrubber with a blue floor pad.
6. Recover Solution: Pick up the soiled solution using a wet vacuum or auto scrubber.
7. Rinse Thoroughly: Rinse the entire area with cold water to remove any remaining cleaner.
8. Detail Cleaning: Wipe adjacent surfaces to remove splashes.
9. Dry & Inspect: Allow to dry completely and inspect for a uniform clean.
10. Restrict Access: Keep traffic off until the floor has been recoated (if applicable).
    
    

Key Features & Benefits

• Suitable for All Washable Surfaces: Safe and effective on a variety of hard surfaces.
• Heavy-Duty Cleaning Power: Cuts through grease, oil, and heavily soiled areas.
• Flexible Application: Can be mopped on or used with automatic scrubbers.
• Stable pH Formula: Maintains cleaning efficiency throughout the entire process.
• Residue-Free Rinse: Rinses clean without leaving film or streaks.